The Johns have been Business of Machining it for 4.38 years (3.38 years recorded to be exact).
Sometimes you get a machine, crank out parts, and make money right away. Sometimes you have to invest time to develop reliable processes and workflows. Grimsmo reminds himself that the KERN is not a job shop machine.
THAT HAS TO BE A KERN FILTER!
Click Image Below for Full Post
The question is, "how do you cheat the KERN and push it beyond those limitations?" Although the machine is incredibly accurate, Grimsmo still has to chase tolerances. To him, that's proof it's not just about the brand of the machine, it's about tooling, the machining strategy, and various factors that come into play when making parts. Finding out those limitations is key to getting the most out of the machine tool.
When Saunders asked Marv if the Datron could outpace a KERN, the answer was revealed in this hilarious Instagram post. However, to Saunders, in terms of footprint, rigidity, and usability, the DATRON is pretty much a bite-size KERN.
Full Grimsmo Evolution
Grimsmo shares his story about trying to make a perfect carbide detent press with a PCD endmill. Sometimes entrepreneurs must be willing to bail on an idea or process that isn't working despite sunk time or costs. Full Grimsmo is starting to expand its meaning to more than just being in love with an idea.
Leadership Strategy and Tactics
The Johns discuss REGO-FIX, shink fit, and hydraulic tool holders. Saunders adds that moving away from the bootstrap mentality is tough but it is necessary in some cases. If you buy the beat-down, cheaper version of what you need, that may create a negative perception of the process or how the equipment should be cared for--and that could cost more than buying the new item!
TruePATH + CAMplete
Grimsmo shares a "pucker moment" on the KERN. Saunders expresses his burning desire to have machine tool parameters set in CAM to avoid having to manually change them. While talking about TruePATH and CAMplete, the one thing they caution is to make sure you don't get used to ignoring the warnings!
JOHN: Cycle Start!
ST-20Y: "I'm sorry, John. I'm afraid I can't do that."
Saunders has a HAL 9000 moment where the lathe REFUSES to make a part! Let's just say it has to do with a spindle thermometer and a specific IF, THEN loop.
Scrapping Parts for Warm Ups - No Big Deal, Right?
As an entrepreneur, your attitude can push the business to unimaginable heights or it can blow up in your face. A seemingly innocuous approach to warming up a machine tool could end up translating to a major case of apathy and huge costs in wasted material for Grimsmo.
TORNOS - BARS. BEATS. BATTLESTAR GALACTICA.
What do you do when the machine's been making great parts all day long? You stay at the shop until 4am and feed it! Fraser confirms that the Tornos didn't stop running from Friday morning until Saturday afternoon.
Saunders shares an urban legend about a machine at IBM 30-40 years ago that, once commissioned, NEVER turned off the spindle for the entire duration of the machine tool's life. IF ANYONE HAS HEARD OF THIS, E-Mail firstname.lastname@example.org